German
English
Chinese
Polish
CE Declaration of Conformity safeCAP SC4 A+B with MCR-225
+ Download
DE
+ Download
EN
SCA4 (Switch A)
Description
safeCAP switch A separate
- Ø 63 mm switch surface
- Mounting Ø 45 - 59 mm
- Compatibe with mit MCR-225 safety relay
- Type III C certified according to DIN EN 13851
APPLICATION: PUNCHING | PRESSES
- Optical feedback
green LED (operation)
red LED (triggering) - Compatible with safety relais
MCR-225 - 100 % water- und oil proof - IP69K
Sensor is completely sealed in cast resin - No operation force needed
Ease of use and reduced stress on the wrist - Video
+ Safe machine operation via two-hand control
Downloads SCA4
Service and Support
Product Images
Technical Drawings
Application Images
Housing colors
Housing traffic yellow (RAL 1023)
Features
Switching output: PhotoMOS-Relay NO
Specifications
| Supply voltage |
24V DC |
| Operating temperature |
0°C…+55°C (static) |
| Output signal |
Static |
| Output |
PhotoMOS-Relais, electronic |
| Optical feedback |
16 LEDs alternating (max. 2 colors) |
| Connection |
M12 |
| Mounting method |
screw mounting |
| Housing material |
Polycarbonate (PC) |
| Switch surface material |
Polycarbonate (PC) |
| Performance Level |
Ple* |
| MTTFd |
100 Jahre |
| PFHd |
2,57 10-10 /h |
| Category |
CAT 4* |
| DC |
0 (99% mit Relais) |
| TM |
20 years |
| Note* |
Values are achieved in conjunction with an appropriately approved safety relay for two-hand controls |
Suitable Accessories
Connection cable SCA
Cable for safeCAP SCA4 connection
- M12-plug angled
- 5-cored
- Screw mounting
APPLICATION: PUNCHING | PRESSES
SCP-4 Protector
Protector for table mounting of safeCAP SC4
- Protector made of transparent polycarbonate
- Protection to avoid bypassing the two handed operation
APPLICATION: PUNCHING | PRESSES
SCMF-1
Mounting support for safeCAP SC4
- Mounting support made of POM
- For mounting in a 30° angle to the table
APPLICATION: PUNCHING | PRESSES
MCR-225
Relay for SC4 and SC3x (Dual Channel)
- Inputs for SCA4 + SCB4; SC3x (Dual Channel)
- Output: 2 makers and 1 breaker
- Monitoring of external contactors for contact multiplication and reinforcement
via feedback loop Y1 - Y2 - Over-current and short-circuit proof
APPLICATION: PUNCHING | PRESSES